Removing Trap Targets - Compaq ProLiant 800 User Manual

Removing Trap Targets

To remove a trap target list using the Web-based user interface:
1. Click the Enclosure tab.
2. Click SNMP Configuration in the left panel.
3. Type the list name in the appropriate field of the SNMP area.
4. Click Remove.
5. Click Apply.
To add or remove a trap target list using the CLI, enter:
REMOVE SNMP TRAPRECEIVER <IP address>
The <IP address> must be in the form ###.###.###.###, where ### ranges from
0 to 255.
HP ProLiant BL e-Class Integrated Administrator User Guide
Setting Up the System
5-29