Compaq ProLiant 800 User Manual page 87

Command Line Interface
Table 4-3: User Account Commands
Command
SET USER
CONTACT
{<user
name>}
<contact
info>
SET USER
FULLNAME
{<user
name>} <full
name>
SET USER
PASSWORD
<user name>
{<new
password>}
4-10
continued
Description
If no <user name> exists, the
command modifies the
contact info of the user that
executed the command.
Sets a user's full name.
If no <user name> exists, the
command modifies the full
name of the user that is
currently logged in.
Sets a user's password.
If you do not supply a
password on the command
line, you are prompted for
one.
Note: This command is not
valid in SCRIPT MODE if
password is not specified.
HP ProLiant BL e-Class Integrated Administrator User Guide
Restrictions
Only enclosure administrators may modify
another user's contact information.
The <user name> is case-sensitive. The
<contact info> must be 0-20 characters
long and can include all alphanumeric
characters, the dash, the underscore, and
spaces.
The default contact information is blank.
If spaces are part of the contact
information, enclose the information in
quotes.
Only enclosure administrators may modify
another user's full name.
The <user name> is case-sensitive. The
<full name> must be 0-20 characters long
and can include all alphanumeric, the dash,
the underscore, and space characters.
The default full name is blank.
If spaces are part of this information,
enclose the information in quotes.
Only enclosure administrators may modify
another user's password. Only the
"Administrator" account may modify the
password of the "Administrator" account.
The <user name> is case-sensitive. The
<new password> must be 3-8 characters
long and can include all printable
characters.
continued