Enclosure Network Configuration Commands - Compaq ProLiant 800 User Manual

Command Line Interface

Enclosure Network Configuration Commands

Table 4-4: Enclosure Network Configuration Commands
Command
ADD SNMP
TRAPRECEIVE
R <IP
address>
DISABLE
SECURESH
DISABLE
SNMP
DISABLE
TELNET
DISABLE WEB
4-12
Description
Adds an IP address to receive SNMP
traps.
Only v1 traps are supported. Traps are
directed to the SNMP default port, 162.
Disables Secure Shell access to the
Integrated Administrator.
Disabling Secure Shell prevents
access to the Web-based user
interface and the Secure Shell terminal
interface until a terminal session re-
enables the Secure Shell protocol.
Disables SNMP support for the
Integrated Administrator.
Does not clear the SNMP trap
receivers that have been configured.
SNMP trap receivers can still be added
and removed. If SNMP is disabled,
Insight Manager agents do not work
properly.
Disables Telnet access to the
Integrated Administrator.
Disables HTTP and HTTPS access to
the Integrated Administrator.
This command prevents access to the
Web-based user interface.
HP ProLiant BL e-Class Integrated Administrator User Guide
Restrictions
Only enclosure administrators may
execute this command.
A maximum of 8 IP address may be
added to receive SNMP traps.
The <IP address> must be in the
form ###.###.###.### where ###
ranges from 0 to 255.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
continued