Changing The Backlight Setting; Changing The Ring Type Setting - Cisco IP CONFERENCE STATION 7936 Administration Manual

Chapter 3 Configuring the Cisco IP Conference Station 7936

Changing the Backlight Setting

Step 1
Step 2
Step 3
Step 4
Step 5

Changing the Ring Type Setting

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
OL-4746-01
Follow these steps to change the backlight setting on the IP Conference Station:
Press the Menu button.
Select Settings and then press the Select button.
Press the Up or Down scroll button to select Backlight.
Press the On or Off softkey to turn the backlight on or off on the LCD screen.
Press the Exit button to exit this menu.
Follow these steps to change the ring type setting on the IP Conference Station:
Press the Menu button.
Select Settings and then press the Select button.
Press the Up or Down scroll button to select Ringer.
Press the Change softkey.
Press the Up or Down scroll button to select a ring type entry, and then press the
Listen softkey to hear your selection.
There are five ringer sounds. You can also shut off the ringer sound, in which case
Ring Off would display on the LCD screen. The default ringer is Pro Ring.
If you want to select a different ringer type, repeat
Press the Save softkey to save the ringer type.
Press the Exit button to exit this menu.
Cisco IP Conference Station 7936 Administration Guide
Changing the Settings Menu
Step 5.
3-25