Accessing Network Configuration Settings - Cisco IP CONFERENCE STATION 7936 Administration Manual

Chapter 3 Configuring the Cisco IP Conference Station 7936
System Setting
Ringer
Time
Date
Codec
Net Config
Net Speed
HTTP Port

Accessing Network Configuration Settings

Step 1
Step 2
Step 3
OL-4746-01
Description
Indicates the ringer sound setting
on the IP Conference Station.
Indicates the time setting on the
IP Conference Station.
Indicates the date setting on the
IP Conference Station.
Indicates the compression setting
on the IP Conference Station.
Indicates the Ethernet port
configuration on the
IP Conference Station.
Indicates the Ethernet port speed
configuration on the
IP Conference Station.
Indicates the HTTP port through
which users access the web
interface.
You must log in through the Admin Setup menu in order to access the
IP Conference Station network settings.
Follow these steps to access the network settings:
Press the Menu button.
Press the Up or Down scroll button to select the Admin Setup menu.
Press the Select button.

Accessing Network Configuration Settings

Usage Notes
There are five ringer sounds. You can also
shut off the ringer sound, in which case
Ring Off would display on the LCD
screen. The default ringer is Pro Ring.
There are two time format
settings—12 hour and 24 hour.
There are two date format
settings—MM/DD/YY and DD/MM/YY.
This is set automatically by the
IP Conference Station.
This setting may be configured for full- or
half-duplex (FDX or HDX).
This configuration may be set to
10 Mbps, 100 Mbps, or Auto. The default
is set to Auto.
The default HTTP port is 80. This port
number may be set to any number. If you
change the default value, users will have
to append the port number as a suffix to
the IP address of the IP Conference
Station when they access the web
interface.
Cisco IP Conference Station 7936 Administration Guide
3-7