Cisco IP CONFERENCE STATION 7936 Administration Manual page 50

Installing the Cisco IP Conference Station 7936
Sequence Step
Startup—The startup process occurs about
15 seconds after you power up the device.
Configuring IP Address—These messages appear
when the protocol is configuring the IP address.
Trivial File Transfer Protocol (TFTP)
configuration—This message appears when
connectivity is established with the TFTP server.
Cisco CallManager configuration—This message
appears when connectivity is established with the
Cisco CallManager.
Cisco CallManager registration—This message
appears while the device is registering with the
Cisco CallManager.
Initialization complete
Note
Cisco IP Conference Station 7936 Administration Guide
2-20
The startup process may take several minutes, and some of these messages may
not appear due to the access speed of your network.
After the IP Conference Station has successfully registered with the
Cisco CallManager, the following information appears in the LCD screen display:
Date and Time
•
IP Address
•
Local number
•
The message "Press the Phone Key to get a dial tone"
•
Corp Dir and Ph Book softkeys
•
If the IP Conference Station successfully passes through these steps, it has started
properly.
Chapter 2 Installing the Cisco IP Conference Station 7936
LCD Screen Message Display
Cisco Systems, Inc.
Polycom Technology
Copyright 2003
Configuring IP...
Press Menu to Reconfigure
Station IP: IP address
Contacting: TFTP Server
Opening: Cisco CallManager IP address
Registering...
Press the Phone Key to get a dial tone
OL-4746-01