Using the Cisco IP Conference Station 7936
Using the Cisco IP Conference Station 7936
IP Conference Station 7936 Features and Functions
Cisco IP Conference Station 7936 Administration Guide
2-24
The Cisco IP Conference Station 7936 features two outboard microphone jacks to
enable the use of optional, external microphones. Along with its enhanced speaker
design, the IP Conference Station is ideal for use in larger-sized conference rooms
to facilitate conference calling. (You can order the IP Conference Station without
external microphones for use in smaller offices and conference rooms.)
The IP Conference Station 7936 supports a maximum of two calls on a single
line. The phone's control panel includes 25 keys; an LCD provides for
information display.
When you press the Phone key on the IP Conference Station 7936, the phone goes
off-hook and a dial tone is heard. The dial sequence begins, and three LEDs are
turned on (green) to indicate an active state. If a call is received while you are on
an active call, a call waiting tone is played.
A backlight illuminates the LCD screen on the IP Conference Station 7936. This
backlight is turned on whenever a key is pressed. The backlight is turned off when
the IP Conference Station 7936 is not used or when a call exceeds one minute. If
a second call is received when a call is in progress and the backlight is turned off,
the light will be turned back on.
The IP Conference Station 7936 includes three context-sensitive keys, a menu
access and exit key, and scroll and select keys. The following functions are
accessible via these keys:
Call interface
•
Configuration interface
•
Additional call functions (functions that are not accessible through the
•
softkeys)
Phone Book access (a local phone book is available to store up to 20 numbers)
•
See
Figure 2-4 on page 2-25
the Cisco IP Conference Station 7936
Chapter 2
Installing the Cisco IP Conference Station 7936
for an explanation of the features and functions of
.
OL-4746-01