Cisco IP CONFERENCE STATION 7936 Administration Manual page 64

Verifying System Settings
Timesaver
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
System Setting
Language
Local number
DHCP
MAC Address
Cisco IP Conference Station 7936 Administration Guide
3-4
You can also use the Cisco IP Conference Station 7936 web interface to view
system settings. See the
section on page 3-33.
Follow these steps to verify system settings:
Press the Menu button.
Press the Up or Down scroll button to select the Admin Setup menu.
Press the Select button.
Enter the administrator password. (The default administrator password is **#.)
Press the Enter softkey.
Press the Up or Down scroll button to select System Info and then press the Select
button.
Press the Up or Down scroll button to scroll through the system information
described in the following table.
Description
Displays the language selection for
the IP Conference Station.
This is the local phone number or
extension that is assigned to the
IP Conference Station.
Indicates whether Dynamic Host
Configuration Protocol (DHCP) is
enabled or disabled.
Indicates the unique Media Access
Control (MAC) address of the
IP Conference Station.
Chapter 3 Configuring the Cisco IP Conference Station 7936
"Cisco IP Conference Station 7936 Web Interface"
Usage Notes
English is the default language.
Conference calls are initiated using this
number.
DHCP is enabled by default; it can be
disabled through the Admin Setup >
Network Setup configuration menus.
This address is the hardware address
associated with the phone. It cannot be
configured.
OL-4746-01