Table of Contents
Advertisement
JUNOSe 11.1.x Service Availability Configuration Guide
show ip vrrp
118
Monitoring VRRP
See baseline ip vrrp.
Use to display a detailed summary of all configured VRIDs.
Use the interface keyword to specify a specific Fast Ethernet, Gigabit Ethernet,
or 10-Gigabit Ethernet interface.
Use the summary keyword to display a summary count on all configured VRIDs
Field descriptions
Interface Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet interface
specifier and VRID
primary address IP address used while in master state; not necessarily an
associated address
operational state State of the VRRP router: master, backup, or init; when
the operational state is backup, the current master router IP address is
provided
admin state Administrative status: enabled or disabled
up time Number of seconds that the VRID has been enabled in non-init
state
interval VRRP advertisement interval in seconds or milliseconds
Learning timer mode Mode of the VRRP router: enabled or disabled; when
the mode is enabled, the router learns the VRRP advertisement interval that
is useful in case of failure of the master router. If the mode is disabled, the
router does not learn the VRRP advertisement interval.
last error status Help text used to debug any error detected
priority Priority value of VRRP router
admin priority Priority of the VRRP administrative router
auth type The VRRP authentication type: none or text
preemption VRRP router preemption status: enabled or disabled
accept data VRRP router accept data status: enabled or disabled
assoc address(es) IP addresses associated with the VRID
track object Name and state of the tracked object and the value by which
the object priority changes following an object state change
ip interfaces with vrrp Number of IP interfaces using VRRP
entries Total number of entries
entries enabled Number of enabled entries
entries with owner priority Number of entries with an owner priority
Advertisement
Table of Contents
