Table of Contents
Advertisement
midplane rev Hardware revision number of the redundancy midplane
fabric slice redundancy Status of the fabric slice on the SRP modules or
SFMs on the E120 and E320 routers
slot Slot in which the fabric slice resides
state State of the fabric slice (online, not present)
type Identifier for the type of hardware (SRP module or SFM)
Example 1
In the following example, the user issues a show redundancy command, and
then a redundancy force switchover command. Finally, the user issues the
show redundancy line-card command to display information specific to the
line modules. The two displays show how the states of the primary and spare
line modules change.
host1#show redundancy
SRP
---
high-availability state:
current redundancy mode:
last activation type:
Criteria Preventing High Availability from being Active
-------------------------------------------------------
criterion
----------------------------------
High Availability mode configured?
Mirroring Subsystem present?
Line Card
---------
automatic reverting is off
hardware
lockout
slot
role
config
----
--------
---------
0
spare
2
primary
protected
12
---
midplane
midplane
slots
type
-----
--------
--------
0 - 5
6
host1#redundancy force-switchover 2
host1#show redundancy line-card
automatic reverting is off
Chapter 2: Managing Module Redundancy
disabled
file-system-synchronization
cold-start
met
---
No
No
backed
up
sparing
by
for
slot
slot
------
-------
---
---
---
---
---
---
---
---
rev
0
backed
up
sparing
Monitoring Line Module and SRP Module Redundancy
revert
at
------
---
---
---
21
Advertisement
Table of Contents
