Table of Contents
Advertisement
show ip vrrp statistics
adv interval (sec): 1
priority: 255 (owner)
auth type: none
assoc address(es): 11.0.0.1, 110.0.0.1, 111.0.0.1
See show ip vrrp neighbor.
Use to display statistics of configured VRRP routers and each individual VRID.
Use the delta keyword with the show ip vrrp statistics command to view the
baseline statistics.
Use the interface keyword with the show ip vrrp statistics command to specify
a specific Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet interface.
Field descriptions
checksumErrors Total number of VRRP packets received with an invalid
VRRP checksum value
versionErrors Total number of VRRP packets received with an unknown
or unsupported version number
vrIdErrors Total number of VRRP packets received with an invalid VRID
for this virtual router
iccErrors Count of line module notifications that did not make it to the
controller
txErrors Count of advertisements that did not get sent due to resource
limitations
rxErrors Count of advertisements received that could not be parsed by
VRRP applications
Interface Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet interface
specifier and VRID
becomeMaster Total number of times that this VRID state has transitioned
to master
advertiseRcvd Total number of VRRP advertisements received
advertiseIntervalErrors Total number of VRRP advertisement packets
received for which the advertisement interval is different from the one
configured for the VRID
authFailures Total number of VRRP packets received that do not pass the
authentication check
ipTtlErrors Total number of VRRP packets received with IP TTL (time-to-live)
not equal to 255
priorityZeroPktsRcvd Total number of VRRP packets received with a priority
of 0
priorityZeroPktsSent Total number of VRRP packets sent with a priority
Chapter 5: Configuring VRRP
121
Monitoring VRRP
Advertisement
Table of Contents
