Table 21: Show Icr-Partitions Output Fields - Juniper SERVICE AVAILABILITY - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x Service Availability Configuration Guide
You can also display information about configured ICR partitions using a filter as an
alternative to specifying the state keyword. For instance, to display information
about the backup and dormant ICR partitions only, you can use the exclude Master
keywords, as shown in the following example:
host1#show icr-partitions | exclude Master
Table 21 on page 144 lists the show icr-partitions command output fields.
Meaning

Table 21: show icr-partitions Output Fields

144
Monitoring the Configuration of ICR Partitions
Master ICR Partitions: 1
Total ICR Partitions: 5
Interface-Location Vrrp-Id
-----------------------------------------------------------------------
3/5/0.2 20
2/1/0.1 1
2/5/0.2 2
3/1/0.1 4
-----------------------------------------------------------------------
Total ICR Partitions: 5
Field Name
Interface-Location
Vrrp-Id
State
Partition-ID
Dormant ICR Partitions
Backup ICR Partitions
Master ICR Partitions
State Partition-ID
*Backup part20A
Backup part1Backup
Backup part2Backup
Dormant part4
Field Description
Interface Identifier or location identifier of the ICR
partition.
VRRP identifier of the VRRP instance associated with
the ICR partition.
State of the ICR partition:
Master ICR partition that accepts subscriber
login requests.
Backup ICR partition that does not accept
subscriber login requests.
Dormant When the IP address or virtual router
is forcibly deleted, or if the lower interface is
not available, the ICR partition moves to the
Dormant state. The dormant ICR partition does
not accept subscriber login requests.
NOTE: The state of the ICR partition depends on the
associated VRRP instance. When the state of the
VRRP instance changes, the state of the ICR partition
also changes. A '*' associated with an ICR partition
indicates that the partition is in transition.
Identifier for the ICR partition.
Number of dormant ICR partitions on the router.
Number of backup ICR partitions configured on the
router.
Number of master ICR partitions configured on the
router.