Table of Contents
Advertisement
Remedy: If not standby, Wait for card to come online before
proceeding
->
Problem: Card not disabled or not online: Slot 8, CT3-12, 0/
0
Reporting Slot: 6
Impact: If you continue, the card will immediately be reset
and then cold started when ISSU Upgrade completes
Remedy: If not standby, Wait for card to come online before
proceeding
4
Configuration conversion support ready?
5
CLI sessions ready?
6
Routing applications ready?
7
Protocol timers ready?
Table 17 on page 103 lists the show issu command output fields.
Meaning
Table 17: show issu Output Fields
Field Name
ISSU state
ISSU description
criteria met
running release
armed release
ISSU Activation Criteria Summary
In-Service Software Upgrade
ready?
High-Availability ready?
Line Modules ready?
Chapter 4: Configuring a Unified In-Service Software Upgrade
Conditional
Yes
Yes
Yes
Yes
Field Description
State of the upgrade process, idle, initializing,
initialized, or upgrading
State of the upgrade, including percent complete
Whether prerequisites for the upgrade have been met
and, generally, what errors occurred
Filename of JUNOSe Software release that is currently
running on the SRP modules
Filename of JUNOSe Software release that is armed
to become the next running release when the router
reboots
Summarizes the criteria for unified ISSU activation.
Criteria required for unified ISSU activation. Possible
values: Yes, No, Conditional.
NOTE: All criteria must be "yes" for unified ISSU to
be active.
Criteria required for unified ISSU activation. Possible
values: Yes, No, Conditional.
NOTE: All criteria must be "yes" for unified ISSU to
be active.
Criteria required for unified ISSU activation. Possible
values: Yes, No, Conditional.
NOTE: All criteria must be "yes" for unified ISSU to
be active.
Monitoring the Status of the Router During Unified ISSU
103
Advertisement
Table of Contents
