Editing A Syslog Destination - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual
Strm log management administration guide
Hide thumbs
Also See for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1:
Table of Contents
Advertisement
80
F
S
ORWARDING
YSLOG
Step 4
Step 5
Editing a Syslog
Destination
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
D
ATA
Enter values for the parameters:
Forwarding Event Collector - Using the drop-down list box, select the
•
deployed Event Collector from which you wish to forward log data.
•
IP - Enter the IP address of the system to which you wish to forward log data.
Port - Enter the port number on the system to which you wish to forward log
•
data.
Click Save.
To edit a syslog forwarding destination:
In the Administration Console, click the SIM Configuration tab.
The SIM Configuration panel appears.
Click the Syslog Forwarding Destinations icon.
The Syslog Forwarding Destinations window appears.
Select the entry you wish to edit.
Click Edit.
The Syslog Forwarding Destinations window appears.
Update values, as necessary:
Forwarding Event Collector - Using the drop-down list box, select the
•
deployed Event Collector from which you wish to forward log data.
IP - Enter the IP address of the system to which you wish to forward log data.
•
Port - Enter the port number on the system to which you wish to forward log
•
data.
Click Save.
STRM Log Management Administration Guide
Advertisement
Table of Contents
