Configuring The Console Settings - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual
Strm log management administration guide
Hide thumbs
Also See for SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1:
Table of Contents
Advertisement
Step 4
Step 5
Configuring the
Console Settings
Step 1
Step 2
Table 3-4 Global System Notifications Parameters (continued)
Parameter
Dropped Transmit
packets
Transmit carrier errors
Receive frame errors
Receive fifo overruns
Transmit fifo overruns
Transactions per second
Sectors written per
second
Click Save.
The STRM Log Management Administration Console appears.
From the menu, select Configurations > Deploy configuration changes.
The STRM Log Management Console provides the interface for STRM Log
Management. This Console is also used to manage distributed STRM Log
Management deployments.
The Console is accessed from a standard web browser. When you access the
system, a prompt appears for a user name and password, which must be
configured in advance by the STRM Log Management administrator. STRM Log
Management supports the following web browsers:
Internet Explorer 6.0 or 7.0
•
•
Mozilla Firefox 2.0
To configure STRM Log Management Console settings:
In the Administration Console, click the System Configuration tab.
The System Configuration panel appears.
Click the Console icon.
The Console Management window appears.
STRM Log Management Administration Guide
Configuring the Console Settings
Description
Specify the threshold number of transmitted packets that
are dropped per second due to a lack of space in the
buffers.
Specify the threshold number of carrier errors that occur
per second while transmitting packets.
Specify the threshold number of frame alignment errors
that occur per second on received packets.
Specify the threshold number of First In First Out (FIFO)
overrun errors that occur per second on received
packets.
Specify the threshold number of First In First Out (FIFO)
overrun errors that occur per second on transmitted
packets.
Specify the threshold number of transfers per second
sent to the system.
Specify the threshold number of sectors transferred to or
from the system
33
Advertisement
Table of Contents
