Click Next.
Step 3
The attributes window appears.
Edit the following values, as necessary:
Step 4
Host is NATed - Select the check box if you wish to use existing Network
•
Address Translation (NAT) on this managed host. For more information on
NAT, see
Using NAT with STRM Log
Note: If you wish to enable NAT for a managed host, the NATed network must be
using static NAT translation. For more information on using NAT, see
with STRM Log
Enable Encryption - Select the check box if you wish to create an encryption
•
tunnel for the host.
STRM Log Management Administration Guide
Management.
Managing Your System View
Management.
67
Using NAT