Editing A Sentry - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - REV1 Manual

72 M S
ANAGING ENTRIES
Step 13

Editing a Sentry

Step 1
Step 2
Step 3
Table 4-19 Sentry Response Parameters (continued)
Parameter Sub-Parameter Action
Trigger Trigger Script
Syslog
Review the sentry details. Click Finish.
You can only edit sentries that you have created. To edit a sentry:
Click the Network Surveillance tab.
The Network Surveillance interface appears.
Below the graph, click View Sentries.
The Sentry List window appears.
Click the sentry you wish to edit.
The sentry details appear.
STRM Users Guide
Using the drop-down list box, specify the action you
wish the sentry engine to perform. The options include:
Trigger Script - Specify if you wish this sentry to
•
use the following:
SNMP traps - Sentry engine sends an SNMP Trap
notification.
Block IPs - Sentry engine blocks specific IP
addresses.
Parameters - Specify the parameters required to
•
trigger either the SNMP trap, or to block IP
addresses.
Note: These default scripts need to be customized for
proper use in your environment. To edit the script, use
SSH to login to your STRM Console and edit the
scripts in the /opt/qradar/triggerbin directory. For
assistance, contact your local administrator.
Select the check box if you wish to save the sentry
event log file to the syslog server.