Renaming Components; Managing Your System View - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual

Step 5
Step 6
Step 7
Step 8
Renaming
Components
Step 1
Step 2
Step 3
Step 4
Managing Your
System View
Encrypt traffic from off-site source - Select the check box if you wish to
•
encrypt traffic from an off-site source. To enable encryption, you must select
this check box on the associated off-site source and target.
Click Next.
Click Finish.
Repeat for all remaining off-site sources and targets.
From the main menu, select File > Save to staging.
Note: If you update your Event Collector configuration or the monitoring ports, you
must manually update your source and target configurations to maintain the
connection between deployments.
You may wish to rename a component in your view to uniquely identify
components through your deployment.
To rename a component:
Select the component you wish to rename.
From the menu, select Actions > Rename Component.
Note: You can also use the right mouse button (right-click) to access the Action
menu items.
The Rename component window appears.
Enter a new name for the component. The name must be alphanumeric with no
special characters.
Click Ok.
The System View allows you to manage all managed hosts in your network. A
managed host is a component in your network that includes STRM Log
Management software. If you are using a STRM Log Management appliance, the
components for that appliance model appear. If your STRM Log Management
software is installed on your own hardware, the System View includes a Host
Context component. The System View allows you to select which component(s)
you wish to run on each managed host.
Using the System View, you can:
Set up managed hosts in your deployment. See
•
Use STRM Log Management with NATed networks in your deployment. See
•
Using NAT with STRM Log
STRM Log Management Administration Guide

Managing Your System View

Setting Up Managed
Management.
63
Hosts.