Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual page 48

42 S U STRM L
ETTING P
Step 6
Step 7
Step 8
M
OG ANAGEMENT
In the Time Zone box, select the time zone in which this managed host is located
using the Change timezone to list box. Click Save.
In the Time Server box, you must specify the following options:
Timeserver hostnames or addresses - Specify the time server hostname or
•
IP address.
Set hardware time too - Select the check box if you wish to set the hardware
•
time as well.
Synchronize on schedule? - Specify one of the following options:
•
- No - Select the option if you do not wish to synchronize the time specified in
the Run at selected time below options. Go to
- Yes - Select the option if you wish to synchronize the time. See options
below.
Simple Schedule - Specify if you wish the time update to occur at a specific
•
time. If not, select the Run at times selected below option.
Times and dates are selected below - Specify the time you wish the time
•
update to occur.
Click Sync and Apply.
STRM Log Management Administration Guide
Step 8.