Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual page 36

30 S U STRM L
ETTING P
Step 4
Step 5
M
OG ANAGEMENT
Table 3-3 System Settings Parameters (continued)
Parameter
Destination Port
Community (V2)
User Name
Security Level
Authentication Protocol
Authentication Password
Privacy Protocol
Privacy Password
Embedded SNMP Agent Settings
Enabled
Community String
IP Access List
Click Save.
The STRM Log Management Administration Console appears.
From the menu, select Configurations > Deploy All.
STRM Log Management Administration Guide
Description
Specify the port to which you wish to send SNMP
notifications. The default is 162.
Specify the SNMP community, such as public. This
parameter only applies if you are using SNMPv2.
Specify the name of the user you wish to access SNMP
related properties.
Specify the security level for SNMP. The options are:
NOAUTH_NOPRIV - Indicates no authorization and no
•
privacy. This the default.
AUTH_NOPRIV - Indicates authorization is permitted
•
but no privacy.
AUTH_PRIV - Allows authorization and privacy.
•
Specify the algorithm you wish to use to authenticate
SNMP traps.
Specify the password you wish to use to authenticate
SNMP.
Specify the protocol you wish to use to decrypt SNMP
traps.
Specify the password used to decrypt SNMP traps.
Enables or disables access to data from the SNMP Agent
using SNMP requests. The default is No.
Specify the SNMP community, such as public. This
parameter only applies if you are using SNMPv2 and
SNMPv3.
Specify the systems that can access data from the SNMP
agent using SNMP request. If the Enabled option is set to
Yes, this option is enforced.