Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 R2 - LOG MANAGEMENT ADMINISTRATION GUIDE REV 1 Administration Manual page 40

34 S U STRM L
ETTING P
Step 3
M
OG ANAGEMENT
Enter values for the parameters:
Table 3-5 STRM Log Management Console Management Parameters
Parameter
Console Settings
Enable 3D graphs in the
user interface
Authentication Settings
Persistent Session
Timeout
Maximum Login Failures
Login Failure Attempt
Window (in minutes)
Login Failure Block Time
(in minutes)
Login Host Whitelist
Inactivity Timeout (in
minutes)
STRM Log Management Administration Guide
Description
Using the drop-down list box, select one of the following:
Yes - Displays Dashboard graphics in 3-dimensional
•
format.
No - Displays Dashboard graphics in 2-dimensional
•
format.
Specify the length of time, in days, that a user system will
be persisted, in days. The default is 0, which disables this
features and the "remember me" option upon login.
Specify the number of times a login attempt may fail. The
default is 5.
Specify the length of time during which a maximum login
failures may occur before the system is locked. The
default is 10 minutes.
Specify the length of time that the system is locked if the
the maximum login failures value is exceeded. The
default is 30 minutes.
Specify a list of hosts who are exempt from being locked
out of the system. Enter multiple entries using a comma
delimited list.
Specify the amount of time that a user will be
automatically logged out of the system if no activity
occurs.