Table of Contents
Advertisement
JUNOSe 10.0.3 Release Notes
DHCP
16
Known Behavior
Deprecated Command
show ip dynamic-interface-prefix
show ip mirror interface
show license l2tp-session
t1 lineCoding
traffic-class
tunnel mpls label-dist
tunnel mpls autoroute announce
bgp
unframed
user-packet-class
virtual-router
yellow
The router displays a notice when you issue the command manually. If the
command is in a script, the router automatically maps the deprecated
command to the preferred command. If the deprecated command no longer
has a function, then that command has no effect when you run a script
containing the command.
The show configuration command normally takes a long time to finish for
extremely large configurations. If you specify a search string (with the begin,
exclude, or include options) with the command for a string that is not present
in the configuration, then the CLI session appears to be busy for a prolonged
period. The CLI filtering feature for show commands does not speed up
execution of the command.
Configuring authentication on the DHCP local server requires that you first
disable the DHCP local server for standalone mode. Doing so removes your
entire DHCP local server configuration. Therefore, if you want to configure
authentication, do so before you have otherwise configured the DHCP local
server.
When you upgrade from a release numbered lower than Release 7.1.0, all
DHCP host routes previously stored in NVS are deleted. After the upgrade,
DHCP clients must reacquire their IP addresses, which results in the new host
routes being correctly stored in NVS.
Command Mode
Privileged Exec, User Exec
Privileged Exec
User Exec, Privileged Exec
Controller Configuration
Policy List Configuration
Interface Configuration,
Tunnel Profile Configuration
Interface Configuration,
Tunnel Profile Configuration
Controller Configuration
Policy List Configuration
Domain Map Configuration
Still available in Privileged
Exec and Global
Configuration modes
Controller Configuration
Preferred Command
None
show secure policy-list
None
None. This command never
had any effect.
traffic-class in Classifier
Group Configuration mode
None
None
user-packet-class in
Classifier Group
Configuration mode
router-name
Advertisement
Table of Contents
