Tunneling Maximums - Juniper JUNOSE 10.0.3 - RELEASE NOTES 4-30-2010 Release Note

Tunneling Maximums

Table 13: Tunneling Maximums
Feature
DVMRP (IP-in-IP) tunnels per chassis
DVMRP (IP-in-IP) tunnels per line module with shared
tunnel-server ports provisioned
DVMRP (IP-in-IP) tunnels per ES2-S1 Service IOA
(See Note 1 on page 103.)
GRE tunnels per chassis
GRE tunnels per line module with shared tunnel-server
ports provisioned
GRE tunnels per ES2-S1 Service IOA
(See Note 1 on page 103.)
L2TP sessions per chassis
(See Note 2 on page 103.)
L2TP sessions per line module with shared
tunnel-server ports provisioned
(See Note 2 on page 103.)
L2TP sessions per ES2-S1 Service IOA
(See Note 2 on page 103.)
L2TP tunnels per chassis for SRP-100
L2TP tunnels per chassis for SRP-320 with ES2 4G LM 32,000
Table 13 lists tunneling maximums for the E120 router and the E320 router. The
following notes are referred to in Table 13:
1. The ES2-S1 Service IOA supports any combination of DVMRP, GRE, and L2TP
tunnels up to a maximum of 8000 tunnels; however, no more than 4000
tunnels can be DVMRP or GRE tunnels in any combination.
2. For more information about supported L2TP sessions and tunnels, see JUNOSe
Broadband Access Configuration Guide, Chapter 11, L2TP Overview.
E120
4000
4000
4000
4000
4000
4000
60,000
8000
16,000
16,000
Appendix A: System Maximums
E320
4000
4000
4000
4000
4000
4000
60,000
8000
16,000
16,000
32,000
E120 and E320 System Maximums
103