Table of Contents
Advertisement
JUNOSe 10.0.3 Release Notes
DHCP Relay
DHCP Server
DoS
Ethernet
Forwarding
52
Resolved Known Problems
DhcpBasePlugIn::receivePacket() debugs displayed on line module for every
DHCP packet received. [Defect ID 89934]
SRP reset type: processor exception 0x300 task: dhcpRelay_dhcpRe
doMacAddressChange [Defect ID 90059]
SRP reset type: panic file: dhcpRelay.cc task: dhcpRelay_dhcpRe
deleteMsnvRoutesWorker [Defect ID 90095]
SRP crash - reset type: panic task: dhcpRelay_dhcpRe file: dhcpRelay.cc line:
11249 [Defect ID 90123]
IP DHCP-LOCAL limit for LAG interfaces is not preserved through a reboot
[Defect ID 90146]
DoS-protection-group configuration for IpLocalLspPing is not working as
expected. [Defect ID 88877]
eset type: exception 0x68616c74 (halt);halter PC:
0x1cb5928;Lm10DosAdaptationLayer::DosEngine::sendEngineRequest [Defect
ID 90200]
Few COA-ACK packets sent from the ERX router are missing under
control-plane load. [Defect ID 89788]
Dynamic VLAN subinterfaces get stuck in down state after a link flap on a
Tengig port. [Defect ID 184983]
In the Gigabit Ethernet line modules, the CPU usage increase after upgrade to
9.1.2 due to unified ISSU changes. [Defect ID 89846]
LM10A or LM10+ crashes when removing merge policies;
file:aptationLayer.cc; line: 7515; task: scheduler. [Defect ID 185102]
Memory Leak observed in NWT LAB when flapping DHCP and PPPoE
subscribers on LM10. [Defect ID 185871]
Multicast admission bandwidth in adaptive mode blocking multicast streams
[Defect ID 87822]
Unable to send message type X to address (15a15 0) because ICC returned
error code Y log message not clear. [Defect ID 89524]
Few COA-ACK packets sent from the ERX router are missing under
control-plane load. [Defect ID 89788]
Advertisement
Table of Contents
