E120 And E320 System Maximums; General System Maximums - Juniper JUNOSE 10.0.3 - RELEASE NOTES 4-30-2010 Release Note

For e series broadband services routers
Table of Contents

Advertisement

JUNOSe 10.0.3 Release Notes

E120 and E320 System Maximums

General System Maximums

Table 8: General System Maximums
Feature
Fabric size
Chassis per 7-foot rack
NTP clients
NTP servers
Sessions per chassis (simultaneous Telnet + FTP +
SSH, in any combination)
Virtual routers and VRFs per chassis, combined
(See Notes 1 and 2 on page 88.)
Virtual routers and VRFs per line module, combined
(See Notes 1 and 2 on page 88.)
88
E120 and E320 System Maximums
The following tables provide system maximums for the E120 router and the E320
router.
Table 8 lists some general system maximums for the E120 router and the E320
router. The following notes are referred to in Table 8:
1. The maximum number applies to any combination of VRs and VRFs. The
number of VRs and VRFs that you can configure depends on your
configuration. You cannot achieve the maximum number if each VR and VRF
instance is running a routing protocol.
2. The maximum of 3000 VRs and VRFs can be achieved only with the SRP-120
and SRP-320 modules, which have 4 GB of memory. The limits cannot be
achieved with the SRP-100 module, which has 2 GB of memory.
E120
120 Gbps
6
1000
300
30
3000
3000
E320
100 Gbps/320 Gbps
3
1000
300
30
3000
3000

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 10.0.3

Table of Contents