Video Signal Flow - Edirol V-8 Owner's Manual

Video Signal Flow

You can use the input selector to choose any two of the video signals coming into the eight input jacks. These two video
signals are sent to bus A and bus B of the video mixer section.
The video signals sent to bus A and bus B are mixed in the video mixer section. The mixed signal then passes through the
output fader and is sent from the output jack.
☞ For details on the structure of the mixer, refer to "Block Diagram" (p. 108).
fig.signal-flow-e.eps
INPUT1
Inside of the V-8
* The preview output will also show the settings menu of the V-8 overlaid with the image (p. 23).
* INPUTs 5–7 provide composite connectors and S-video connectors. If an image is being input to both connectors of the
same channel, the input from the S-video connector will take priority.
* INPUT 8 provides both an S-video connector and a PC connector. If an image is being input to both of these, the input
from the S-video connector will take priority.
Video device
INPUT2 INPUT3 INPUT4 INPUT5
Input selector
Bus A
Effects
Fader
Video mixer
Output fader
OUTPUT
Final output
INPUT6 INPUT7 INPUT8
Bus B
Effects
Fader
Computer
PC1 PC2
PC input selector
Scan converter
Preview selector
PREVIEW OUT
Preview output
9