Operating The Menu - Edirol V-8 Owner's Manual

Basic Operation
(continued)

Operating the Menu

* The "Mem2" through "Mem8" indications at the right of the menu items indicate that settings will be stored in
[MEMORY] knob locations 2–8. If you want to change settings, turn the [MEMORY] knob to select the memory
number 2–8 whose settings you want to change.
fig.menu-preset.eps
* If "Mem 1" (memory number 1) is indicated, you won't be able to change the
contents, since these are the factory preset settings. The menu will indicate "✽✽
Preset ✽✽".
1
Press the [MENU] button to access the menu.
fig.menu1.eps
2
Use the [
fig.menu2.eps
The [
The menu item at the cursor will blink, indicated that it is selected.
3
Press the [ENTER] button to confirm your choice of menu item.
fig.menu3.eps
The selected menu item will be confirmed, and you'll proceed to the next menu (a lower level).
To return to the previous menu (higher level), press the [MENU] button.
* If the menu level is deeper, repeat steps 2–3.
4
Use the [
5
Press the [MENU] button several times to close the menu.
While the menu is displayed, you can temporarily hide the menu by holding down the currently selected PREVIEW OUT
SELECT button.
24
] [ ] buttons to select a menu item.
] [ ] buttons move the cursor up/down.
] [ ] buttons to edit the value.
☞
"Storing the Operating Panel Settings" (p. 28)