Edirol V-8 Owner's Manual page 67

Turning MIDI message transmission on/off (Panel mode)
Here's how to specify whether MIDI messages will be transmitted when you operate the V-8's buttons and knobs.
1
Turn the [MEMORY] knob to select the memory number 2–8 that you want to edit.
2
Press the [MENU] button to access the menu, and choose "MIDI Setup."
3
Use the [ ] [ ] buttons to choose "Panel Mode," and press the [ENTER] button.
4
Use the [ ] [ ] buttons to select "Video+MidiOut" or "Midi Out Only."
Value Details
Video+MidiOut Video signals and MIDI messages will be output.
Video Only Only video signals will be output.
Midi Out Only Only MIDI messages will be output (Local Off).
If the "Midi Out Only" setting is selected, the following buttons and knobs can be operated. The other
buttons and knobs will not do anything. If you press a button that does nothing, it will not light.
[MENU] button, [
[BPM/CONTROL] knob, [MEMORY] knob, PREVIEW OUTPUT SELECT buttons,
[PC INPUT SELECT] switch, [WHITE/BLACK] switch
5
Press the [MENU] button several times to close the menu.
Using the V-8 with Other Equipment
* Memory number 1 contains the factory preset settings (p. 28). These settings
cannot be modified.
] button, [ ] button, [ENTER] button, [TAP] button,
(continued)
67