Assigning Different Effects To The Effects Buttons - Edirol V-8 Owner's Manual

Assigning Different Effects to the EFFECTS Buttons

You can change the effects that are assigned to the EFFECTS buttons.
1
Turn the [MEMORY] knob to select the memory number 2–8 whose settings you want to edit.
2
Press the [MENU] button to access the menu, and choose "Effects-A" or "Effects-B."
3
Use the
[ ] [
change.
4
Use the
[ ] [
If you press the corresponding EFFECTS button so it's lit or blinking, and then operate the video fader, you'll be able
to see the currently selected effect applied to the output image.
For details on effects, refer to "Effect List" (p. 105).
5
Press the [MENU] button several times to close the menu.
* Memory number 1 contains the factory preset settings (p. 28). These settings
cannot be modified.
Press the [MENU] button to access the menu.
Use the [
Select the menu item for the button whose assignment you want to
change.
Button
Bus A EFFECTS buttons
Bus B EFFECTS buttons
Press the [ENTER] button to confirm your selection.
buttons to select the menu item for the button whose assignment you want to
]
Press the [MENU] button to access the menu, and choose "A-Efx1"–
"A-Efx4" or "B-Efx1"–"B-Efx4"
Select the menu item for the button whose assignment you want to
change.
● If you've selected bus A
Button
[1 (FEEDBACK)] button
[2 (NEGATIVE)] button
[3 (COLORIZE)] button
[4 (MULTI)] button
● If you've selected bus B
Button
[1 (FLIP)] button
[2 (CHROMA KEY)] button
[3 (LUMINANCE KEY)] button
[4 (P in P)] button
Press the [ENTER] button to confirm your selection.
buttons to specify to the desired effect type.
]
] [ ] buttons to select "Effects-A" or "Effects-B."
Menu item
Effects-A
Effects-B
Menu item
A-Efx1
A-Efx2
A-Efx3
A-Efx4
Menu item
B-Efx1
B-Efx2
B-Efx3
B-Efx4
Using Effects
(continued)
53