Specifying The Video Fader Operating Curve - Edirol V-8 Owner's Manual

Adjusting the Video Fader

Specifying the Video Fader Operating Curve

Here's how to select the operating curve by which the video fader will switch between images.
1
Press the [MENU] button to access the menu, and choose "Utility."
2
Use the [
3
Use the [
switch between images.
Value
Curve-A
Curve-B
Curve-C
4
Press the [MENU] button several times to close the menu.
Video fader operating modes
When you use the [TRANSFORMER] buttons (p. 40) or BPM Sync (p. 60) to switch images automatically, the position
of the video fader may not match the actual output. You can use the "Utility" menu item "Video Fader Mode" to specify
how the video fader will act when this situation occurs.
Value
Normal
Quick
78
(continued)
] [ ] buttons to select "Video Fader Curve," and press the [ENTER] button.
] [ ] buttons to select the desired operating curve by which the video fader will
Details
Output
Bus B
Bus A
A
Details
The output will not change until the video fader position matches the actual output.
The actual output will immediately change to match the video fader position the instant you move the
fader.
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select "Utility."
Press the [ENTER] button to confirm your selection.
Curve-C
Curve-A
Curve-B
Video fader
B