Editing The Input/Output Settings; Adjusting The Input Image; Adjusting The Pc Input Image - Edirol V-8 Owner's Manual

Editing the Input/Output Settings

Adjusting the Input Image

Adjusting the PC Input Image

Here's how to make adjustments such as the brightness, color, and position of the image being input to the PC connectors.
1
Use the [PC INPUT SELECT] switch to select either the PC1 input or PC2 input.
2
Press the [MENU] button to access the menu, and choose "PC Input Setup."
3
Referring to the table below, use the
press the [ENTER] button.
Menu item
Hposition
Vposition
Hsize
Vsize
Contrast
Brightness
Sharpness
Flick Filter
Color
Zoom
Auto Detect
PC Preset
4
Use the
5
Press the [MENU] button several times to close the menu.
54
* Input image adjustments can be made individually for the PC1 input and PC2
input.
* When you use the [PC INPUT SELECT] switch to switch the PC input, it will
take some time for the input to stabilize. We recommend that you use a
monitor to verify the image.
Details
Adjusts the display position in the horizontal direction.
Adjusts the display position in the vertical direction.
Adjusts the size in the horizontal direction.
Adjusts the size in the vertical direction.
Adjusts the contrast of the image.
Adjusts the brightness of the image.
Adjusts the sharpness of the outline.
Adjusts the flickering of the image.
Adjusts the color of the image.
Turns magnification of the image on/off. Turn this "On" to magnify the image.
Turns the Auto Detect function (automatic detection of input resolution) on/off. (p. 55)
Returns the sub-menu settings to the factory-set state (p. 34).
buttons to edit the value.
[ ] [ ]
Press the [MENU] button to access the menu.
Use the [ ] [ ] buttons to select "PC Input Setup."
Press the [ENTER] button to confirm your selection.
buttons to select the item you want to edit, and
[ ] [ ]