Basic Operation; Transitioning Between Video Input Sources; Using The Video Fader To Switch Video Sources - Edirol V1 video mixer Owner's Manual

Basic operation

Transitioning between video input sources

Here's how to transition (move) between video input sources.

Using the video fader to switch video sources

If you're using a transition effect (Mix or Wipe), you can move between images A
and B by moving the video fader up or down. If you're using a compositing effect
(Superimpose or P in P), the video fader adjusts the transparency of the composited
images.
fig.07-01-1.eps
Video fader indicators
These indicate the position of the video fader. The indicators will light in one of two
ways depending on the function you're using.
• When using a transition effect (Mix or Wipe)
If the video fader is all the way up (A) or down (B), a single green video fader
indicator will be lit. If the video fader is between A and B, a single red video fader
indicator at the left of the video fader will be lit.
fig.07-01-2.eps
• When using a compositing effect (P in P or Superimpose)
The green video fader indicator beside the "background image" will light. If the
video fader is in the center, red video fader indicators up to that position will light.
fig.07-01-3.eps
"parent screen" or
"background image"
16
lit
Transition effects
Mix (p. 18)
Wipe (p. 18)
Compositing effects
P in P (p. 19)
Superimpose (p. 20)