Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 80

To configure the Inactive Device Cleanup schedule:
1 In the ZENworks Control Center, click the Configuration tab.
2 Click Inactive Device Cleanup Schedule.
3 Select Enable Warning to set a warning for devices that have been inactive for the specified
number of days. The default is 10 days.
4 Select Enable Move to move inactive devices to the
specified number of days.
The
InactiveDevices
5 Select Enable Delete to delete inactive devices from the
specified number of days.
By default, devices are never deleted from the
6 Select a schedule type from the drop-down list. The default schedule type is Monthly. The
following schedules are available:
Schedule Type
Monthly
Day of the Week Specific
7 Click Apply.
IMPORTANT: The Set the "Black Out" time ranges when execution should not occur option is
nonfunctional.
80 Novell ZENworks 7.3 Linux Management Administration Guide
folder is created automatically. The default is 30 days.
Inactive Devices
Description
Select the day of the month to run the scheduled event on and set
other restrictions that might apply.
Select one or more days of the week to run the scheduled event on
and set other restrictions that might apply.
folder after the
InactiveDevices
folder after the
InactiveDevices
folder.