Configuring Remote Management Agent; Setting Up The Remote Management Agent Password On The Managed Device - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

5 Click Override.
6 Edit the Remote Management Settings as per your requirements.
7 Click Apply.
These changes will be effective on the managed device on its next Settings Refresh Schedule.

36.2 Configuring Remote Management Agent

The Remote Management Agent allows you to remotely manage the device and configure the
following:
Section 36.2.1, "Setting Up the Remote Management Agent Password on the Managed
Device," on page 500
Section 36.2.2, "Clearing the Remote Management Agent Password," on page 501
Section 36.2.3, "Clearing Remote Management Agent Log Files," on page 501
36.2.1 Setting Up the Remote Management Agent Password on
the Managed Device
The user on the managed device must set a Remote Management Agent password and communicate
the password to the administrator.
To set the Agent password on the managed device, enter the following command at the shell prompt:
# /opt/novell/zenworks/sbin/zrmservice --passwd
The password is case-sensitive and should be between three to eight characters in length.
NOTE: This step is not necessary if the Password Policy is configured to No password.
500 Novell ZENworks 7.3 Linux Management Administration Guide