Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 298

Configuration Element
Type
User
Password
Step 2: Catalog and Bundle Configuration
You must provide details about the catalogs and bundles you want mirrored to your server.
Before you mirror the catalogs and bundles to your server, you can view the available catalogs and
bundles on the remote server.
To view the available catalogs, run the following command:
zlmmirror slc -c filename.xml
To view the available bundles, run the following command:
zlmmirror slb -c filename.xml
CatalogConf
Each catalog you want to mirror must have a separate CatalogConf section:
<CatalogConf>
<Name>Red Carpet 2</Name>
<LocalName>Red Carpet 2</LocalName>
<Target>sles-9-i586</Target>
<Package>lib.*</Package>
</CatalogConf>
Configuration Element
Name
298 Novell ZENworks 7.3 Linux Management Administration Guide
Description
Type of mirroring you want performed:
ZLM: Mirrors catalogs and bundles directly to your ZENworks Linux
Management server. After mirroring, mirrored catalogs and bundles are
displayed in the ZENworks Control Center.
You cannot perform ZLM mirroring on Secondary Servers.
STATIC: Mirrors packages to the file system of your ZENworks Linux
Management server, but does not add them to ZENworks.
You can perform only static mirroring on Secondary Servers.
Name to use when connecting to your ZENworks Linux Management (local)
server. The Administrator user should be specified if you want to use the
default administrator account.
Password for the account provided in User. If you are using the Administrator
account, this is the password you specified during the server installation. For
information about encoding your password,
ZENworks Server Password," on page 319
Description
Name of the catalog you want to mirror from this remote server.
This is the only required parameter.
seeSection 25.10, "Encoding the