Automatically Registering The Services At The Initial Startup Of Zmd - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

Table of Contents

Advertisement

For SUSE LINUX Enterprise Server 11 (SLES 11) and SUSE LINUX Enterprise Desktop 11 (SLED
11) managed devices:
/usr/bin/rug sa https://ZEN_Server_address
For all other managed devices:
/opt/novell/zenworks/bin/rug sa https://ZEN_Server_address
Replace ZEN_Server_address with the IP address or DNS name of the Primary or Secondary Server.
You can also register a device by using the Software Installer or Updater. For more information, see
Section 6.3, "Using the Software Updater, Installer, and Remover from Users' Managed Devices,"
on page
54.
11.3 Automatically Registering the Services at
the Initial Startup of zmd
zmd can automatically register the services configured in the
file. The
initial-configuration
file is located in
on SLES 10 or SLES 11 and SLED 10 or SLED 11 managed devices,
/etc/zmd/
and in
on other managed devices.
/etc/opt/novell/zenworks/zmd/
The
file contains the URL for the supported services that zmd registers
initial-configuration
at initial startup. zmd uses the information in the in the
file to mount all
initial-configuration
the services the first time it starts. These services are not loaded during the subsequent startups
because zmd records the already mounted services in
. If
@localstatedir@/lib/zmd/services
you want zmd to mount the services listed in
every time it starts, you
initial-configuration
must delete the services file before starting zmd.
To have zmd automatically register devices, you must manually create the
initial-
file with the following contents:
configuration
[URL of the service]
type = service_type
key = service_name
In the file, you can also specify the
for services that need a key for
registration_code
registration.
If you want to use special characters such as $ ! & ; ' " in the key value, you must enclose the value
within single quotes.
A sample
file is as follows:
initial-configuration
[https://10.0.0.0]
type=zenworks
[https://update.novell.com/data]
type=rce
[http://www2.ati.com/suse]
type=YUM
104 Novell ZENworks 7.3 Linux Management Administration Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zenworks linux management 7.3 ir2

Table of Contents