Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Installation And Administration Manual page 76

Syntax:
Examples:
This example allows users in the Temps post office to exchange messages with users in the
Exchange NetTech system only. It restricts incoming and outgoing messages to 10 KB. It prevents
rule-generated messages.
[AccessGroup:group_name]
This section lists the access control settings for individual GroupWise users who are assigned to the
access group in ConsoleOne, as described in
Objects" on page
in both directions, you must create separate access groups.
Syntax:[
Examples:
This example allows users in the SysAdminsIn and SysAdminsOut access groups to receive
messages up to 5 MB in size and to send rule-generated messages.
Keywords
Keywords define the access control settings for the users included under each section header.
76 GroupWise 7 Gateway for Microsoft Exchange Installation and Administration Guide
[groupwise_domain.post_office:In]
[groupwise_domain.post_office:Out]
[Corporate.Temps:In]
Allow NetTech
MaxSize=10000
[Corporate.Temps:Out]
Allow NetTech
MaxSize=10000
AllowRuleGenerated=No
79. Access groups do not have direction parameters. If you want to control access
[AccessGroup:group_name]
[AccessGroup:SysAdminsIn]
MaxSize=5000000[
[AccessGroup:SysAdminsOut]
AllowRuleGenerated=Yes
"AllAccess" on page 77
"NoAccess" on page 77
"Block" on page 77
"Allow" on page 78
"MaxSize" on page 78
"AllowRuleGenerated" on page 79
"Using the Gateway Access Field on Individual User