Error Converting Addresses Between Microsoft Exchange And Groupwise Formats While Processing Inbound Or Outbound Message; Exchange Server Was Down While Initializing The Gateway; Export From Exchange Reported Problems While Performing An Inbound Directory Operation; Foreign Domain Information Not Available While Performing An Inbound Directory Operation - Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Error converting addresses between Microsoft Exchange and GroupWise formats
while processing inbound or outbound message
Source: GroupWise Exchange Gateway.
Explanation: The gateway is unable to locate the Exchange address table to map addresses
between Exchange and GroupWise formats.
Action: Verify that the GWISE address type is installed. See
the Exchange Side of the Exchange Gateway," on page
Action: Verify that the Exchange server is running. See
Exchange Side of the Exchange Gateway," on page

Exchange server was down while initializing the gateway

Source: GroupWise Exchange Gateway.
Explanation: The Exchange server services are not running.
Action: Run the Exchange server services as described in
Exchange Side of the Exchange Gateway," on page
gateway. See
Export from Exchange reported problems while performing an inbound directory
operation
Source: GroupWise Exchange Gateway.
Explanation: The export of user objects from Exchange has encountered a problem. The
gateway is unable to obtain objects to exchange with the GroupWise system.
Action: Any corruption in the Exchange system needs to be identified and corrected.
Foreign domain information not available while performing an inbound directory
operation
Source: GroupWise Exchange Gateway.
Explanation: The domain information is not available for the object being processed.
Possible Cause: The object does not have a GroupWise-type address or the address is invalid.
Action: Install the addressing components on the server. See
the Exchange Gateway Addressing Components," on page
Foreign host information not available while performing an inbound directory
operation
Source: GroupWise Exchange Gateway.
Explanation: The host information is not available for the object being processed.
Possible Cause: The object does not have a GroupWise-type address or the address is invalid.
Action: Install the addressing components on the server. See
the Exchange Gateway Addressing Components," on page
Section 7.1, "Starting the Exchange Gateway," on page
Chapter 5, "Configuring
31.
Chapter 5, "Configuring the
31.
Chapter 5, "Configuring the
31, then restart the
55.
Section 4.4, "Installing
27.
Section 4.4, "Installing
27.
Error and Informational Messages 121