Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Installation And Administration Manual page 50

3 Select GWISE (or your custom address type for GroupWise), then click Edit.
4 To change the name of the non-GroupWise domain that you want to represent your Exchange
5 To change the name of the external post office, replace the Exchange administrative group with
6 To change the format of the GroupWise usernames that will be generated for Exchange users,
7 Click OK.
8 Back on the Default Policy properties dialog box, click OK again to save the address format,
9 Continue with
50 GroupWise 7 Gateway for Microsoft Exchange Installation and Administration Guide
In the Address field, the three parts of a GroupWise address (domain, post office, and
username) are separated by periods. The displayed default is
Exchange_organization.Exchange_administrative_group.address_format_variable.
system, replace the Exchange organization with the domain name you want to use
item 12).
the post office name you want to use
replace %m with the desired address format
then click Yes to update all corresponding recipient e-mail addresses to the specified format.
Chapter 6, "Configuring the GroupWise Side of the Exchange Gateway," on
page 51
(worksheet item 13).
(worksheet item 14).
worksheet