Using Snmp Monitoring Programs; Section 9.4, "Using Snmp Monitoring Programs - Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

Max Log Disk Space: Specify the amount of disk space you want the limit to be for log files.
When the limit is reached, the gateway deletes the oldest file until the space occupied is under
the maximum allowable limit. The default value is 1024 KB.
If you set the limit to zero (0), there is no disk space limit for log files.
4 Click OK to save the log settings.
ConsoleOne passes the updated log settings to the Exchange Gateway so that the new log
settings are in force immediately.
Corresponding Startup Switches You could also use the /log, /loglevel, /logdays, and
startup switches in the Exchange Gateway startup file (gwexch.cfg) to control logging.
Exchange Gateway Web Console You can view the Exchange Gateway log files and change the
log settings for the current Exchange Gateway session by clicking the Log Settings link on the
Files page. You can also view and modify log settings at the Exchange Gateway server console on
the server where the gateway is running, as listed in

9.4 Using SNMP Monitoring Programs

You can monitor the Exchange Gateway from Novell ZENworks
management and monitoring program. When properly configured, the Exchange Gateway sends
SNMP traps to network management consoles for display along with other SNMP monitored
programs.
During installation, you had the opportunity to configure the Exchange Gateway for SNMP. If the
option was dimmed, then SNMP was not installed on the Windows server.
If you did not select SNMP support during installation, there is currently no way to add the
functionality short of uninstalling the Exchange Gateway and reinstalling it. See
"Uninstalling the Exchange Gateway," on page 58
"Menu Summary" on page
®
for Servers or any other SNMP
/logmax
Log
91.
Section 7.4,
Monitoring the Exchange Gateway 99