Changing The Link Protocol Between The Exchange Gateway And The Mta - Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

<firstname>
<lastname>
<firstinitial>
<lastinitial>
Each tag is replaced with the corresponding user-specific information. Additional text can be added
to the address format as well.
Examples:
These address rules would result in the following addresses for a user named Sophie Jones at
Corporate.com:
Sophie_Jones@Corporate.com
Sophie.Jones@Corporate.com
SJones@exchange.Corporate.com
8.3 Changing the Link Protocol between the
Exchange Gateway and the MTA
Before the GroupWise 7 Gateway for Microsoft Exchange, the Exchange Gateway and the MTA
communicated by transferring message files through message queue directories using a mapped/
UNC link. Starting with the GroupWise 7 version of the gateway, you can configure the gateway so
that it uses a TCP/IP link to communicate with the MTA, instead of transferring message files
through queue directories. During installation, the Exchange Gateway is configured for a mapped/
UNC link. You can reconfigure it to use a TCP/IP link in ConsoleOne®.
1 In ConsoleOne, right-click the Exchange Gateway object, then click Properties.
72 GroupWise 7 Gateway for Microsoft Exchange Installation and Administration Guide
/addressrule-<firstname>_<lastname>@<domain>
/addressrule-<firstname>.<lastname>@<domain>
/addressrule-<username>@exchange.<domain>