Domain\Wpgate\Exchange Directory; B.2.1 Domain\Wpgate\Exchange Directory - Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

*.dll

B.2.1 domain\wpgate\exchange directory

The Exchange Gateway root directory
installation, you choose the domain where you want to install the Exchange Gateway and you
choose the name of the root directory. The default directory name is exchange.
To improve performance if you installed the Exchange Gateway on a Windows server remote from
the domain directory (for example, if the domain directory is located on a NetWare® server), you
can move the queue directories from the domain directory to the Windows server where the gateway
is running, as described in
000.prc directory
The directory is where the Exchange Gateway processes messages that are passing
000.prc
through the gateway between the GroupWise and Exchange systems.
mmddlog.nnn files
The files are the Exchange Gateway log files where message routing information is
mmddlog.nnn
recorded. See Section 9.3, "Using Exchange Gateway Log Files," on page
gwwork directory
The directory holds temporary files used in message processing.
gwwork
gwhold directory
The directory is where delayed delivery messages are held until their delivery times arrive.
gwhold
gwprob directory
The directory is where the Exchange Gateway places incoming message files that it cannot
gwprob
process. Using the /badmsg
bad messages, or send bad messages to the gateway postmaster. See
Exchange Gateway Administrator about Bad Messages," on page
ds directory
The directory helps the gateway keep track of whether or not directory synchronization has been
ds
performed.
gwds file
The file indicates that directory synchronization has taken place. If you delete the gwds file
gwds
and restart the gateway, the gateway performs directory synchronization immediately and then
recreates the file.
dx directory
The directory helps the gateway keep track of whether or not directory exchange has been
dx
performed.
Supporting Windows DLL programs
is the default location for all Exchange Gateway files. During
Section 10.4, "Reducing Network Traffic," on page
switch, you can configure the gateway to retain bad messages, delete
106.
97.
Section 9.5, "Notifying the
102.
Exchange Gateway Directory Structure 137