Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Installation And Administration Manual page 32

3 Double-click the Exchange Gateway object
4 Select the Recipient containers that contain users whose Address Book information you want to
5 In the Trust Level field, select a trust level number that is larger than the trust level numbers of
6 Click OK to save the Exchange user export information.
7 Make sure that the Exchange services are running.
8 If you want to customize the name of the non-GroupWise domain that represents the Exchange
32 GroupWise 7 Gateway for Microsoft Exchange Installation and Administration Guide
export into the GroupWise system, then click Add.
the users you want to export.
IMPORTANT: Directory synchronization and exchange cannot occur if the trust level of one
or more gateway users is less than that of the Gateway object.
When GroupWise users are imported into the Exchange system, they are, by default, placed in
a container named GroupWise at the root of Active Directory. You can use the
useimportcontainer gateway startup switch to place the users into the import container
specified under Administrative Groups > First Administrative Group > Routing Group > First
Routing Group > Connectors > Exchange Gateway Connector.
7a On the Control Panel, double-click Services.
7b Scroll down to check the status of the following services:
Microsoft Exchange Directory
Microsoft Exchange Event Service
Microsoft Exchange Information Store
Microsoft Exchange Message Transfer Agent
Microsoft Exchange System Attendant
7c If any of the Microsoft Exchange services are not running, start them now.
system, the external post office that represents the Exchange site, or the format of GroupWise-
type usernames for Exchange users, continue with
Exchange 5.5," on page 33.
or
(worksheet item 6), then click Export Containers.
Section 5.1.1, "Customizing Addressing for
/