Enabling Message Status For Sent Items - Novell GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION Installation And Administration Manual

4 Click OK to return to the Gateway Administrators page and add the user to the Gateway
Administrators list.
5 In the Administrator Role box, select the type of administrator you want the user to be.
Operator
Accountant
Postmaster
Foreign Operator
6 Click OK to save the Exchange Gateway administrator list.
ConsoleOne passes the administrator information to the Exchange Gateway so that the
administrators start receiving the appropriate types of messages.

8.7 Enabling Message Status for Sent Items

Both GroupWise and Exchange can return status information to message senders. This lets senders
know if their messages have been delivered, opened, and so on. In order for message status
information to be returned to senders, you need to make sure that message status has been enabled.
Message status information is collected in the status correlation database (gwcorr.db), located by
default in the
domain\wpgate\exchange
1 If you want to change the location of the status correlation database, use the
in the Exchange Gateway startup file (exchange.cfg) to specify a different directory.
2 In ConsoleOne, browse to and right-click the Exchange Gateway object, then click Properties.
3 Click GroupWise > Optional Gateway Settings to display the Optional Gateway Settings page.
4 Fill in the following fields:
directory.
/corr startup switch
Configuring the Exchange Gateway 85