Trigger Signal Specifications For The Time Marker Function; Trigger Signal Specifications For The Edge Function - Fluke 5500A Operator's Manual

5500A
Operator Manual

8-83. Trigger Signal Specifications for the Time Marker Function

Time Marker
Period
5 to 1 s
0.5 to 0.1 s
50 ms to 100 ns
50 to 10 ns
5 to 2 ns
[1] Divider is internally limited to prevent trigger output from frequencies that are either
lower than 0.2 Hz (5 s period) or higher than 10 MHz.

8-84. Trigger Signal Specifications for the Edge Function

Edge Signal
Frequency
1 kHz to 1 MHz
8-64
Amplitude into
Division Ratio [1]
off/1
off/1/10
off/1/10/100
off/10/100
off/100
Amplitude into
Division Ratio
off/1
Typical Rise
50 (p-p) Time
1 V
1 V
1 V 2 ns
1 V
1 V
Typical Rise
50 (p-p)
Time
1 V 2 ns
2 ns
2 ns
2 ns
2 ns