Modifications To Be Made To The Inboard Power Supply; Display Unit; Scanner Unit - JRC JMA-2343 Instruction Manual

9.4

Modifications to be Made to the Inboard Power Supply

Attention
Be sure to use the correctly rated fuse. In the event incorrectly rated fuse is used,
this may cause breakdown in the equipment.
Make modifications as shown below based on the inboard power supply.
(Fuse for 24V is incorporated upon shipment of the equipment)

1. 1. 1. 1. Display unit

Display unit
Display unit Display unit
Fuse rating
Inboard power supply
DC12V
DC24/32V

2. Scanner unit

2. Scanner unit
2. Scanner unit 2. Scanner unit
No modifications need to be made with respect to the scanner unit.
F1
Rating JRC Code
6.3A 5ZFAD00336
3.15A 5ZFAD00227
241
F2
Rating JRC Code
10A 5ZFAD00539
5A 5ZFAD00364