Canceling Timed Transmission; Canceling Timed Transmission While In Standby Mode - JRC JMA-2343 Instruction Manual

(d) Push the
The menu setting has been completed.
1. After transmitting to the extent of the number of rotations of the scanner unit
designated, the system enters the standby mode for the period designated.
During standby mode, the echo from the radar disappears from the screen and
a timer that shows the remaining time to the next transmission is shown on
the display.
2. After completion of the standby period, the system again transmits to the ex-
tent of the designated number of rotations of the scanner unit.
3. This process is repeated.
While timed transmission is in progress, under no circumstances should the
scanner unit be approached.
While the scanner unit is stopped during the standby period, after completion
of such standby period, the scanner unit will resume rotation and may collide
with the body and cause injury.

Canceling timed transmission

Canceling timed transmission
Canceling timed transmission Canceling timed transmission
(e) Select "OFF" in the line "TIMED TX" - the menu "DISPLAY".
The timed transmission has been canceled.
(f) Push the
The menu setting has been completed.

Canceling timed transmission while in standby mode

Canceling timed transmission while in standby mode Canceling timed transmission while in standby mode Canceling timed transmission while in standby mode
(g) Push the
The timed transmission mode will be canceled and the system will return to
normal standby mode.
key.
ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ ＭＥＮＵ
CAUTION
key.
ＭＥＮＵ ＭＥＮＵ
ＭＥＮＵ ＭＥＮＵ
key.
ＳＴＢＹ ＳＴＢＹ ＳＴＢＹ ＳＴＢＹ
193