Creating A Seamless Loop - American Audio VELOCITY MP3 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)
10. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to
create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length
of disc. You create a seamless loop between two continuous points of a disc.
2) Press the IN BUTTON (33). This will set the starting point of the
SEAMLESS LOOP. The IN BUTTON (33) LED will light.
©
Figure 17
American Audio - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 20
®
1) Press PLAY/PAUSE BUTTON (23) to activate playback
mode.
3) Press the OUT BUTTON (2) to set the ending point for
your SEAMLESS LOOP (Figure 13). The IN BUTTON (33)
and OUT BUTTON (2) LEDs will immediately begin to flash
rapidly, indicating the SEAMLESS LOOP mode has been
activated.
VFD LOOP INDICATORS
RELOOP INDICATOR (68) will turn on in the VFD DISPLAY (17)
indicating a loop is active.
Figure 19
Figure 18
- During a seamless loop,