Transport Unit - American Audio VELOCITY MP3 User Manual And Reference Manual

GENERAL FUNCTIONS AND CONTROLS (Cont.)
45
Figure 3
B. REAR PANELS (FIGURE 3)
41. EJECT FUNCTION - This button functions in
the same fashion the main EJECT BUTTON (11)
on the control unit functions. This button is used
to eject a disc inserted in the transport drive. This
button will only function when the unit is in pause
or cue mode to prevent the disc from accidentally
being removed during playback.
42. POWER SWITCH - This button control the
unit main power. The button is surround by a
protective cover to help prevent accidental power
shut downs. Be sure not to turn the power off
when the unit is in playback mode. Never leave
disc inserted in the unit when the power is turned
off.
43. TRANSPORT SLOT - Always insert a disc
with the Label side up! The trayless transport sys-
tem works similar to a car CD player. When a disc
©
41
46 47
American Audio - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 13
®
42 43
48
is inserted into the drive slot the unit will auto-
matically grab the disc and load into the drive
system properly. A CD will automatically cue to
the first track when it is inserted into the transport
system. Never attempt to force a disc into the slot
when the power is turned off, this could damage
the drive system and void the manufactures war-
ranty.
44. CD SLOT INDICATOR - This extremely bright
LED is used to light up the transport slot in dark
situations and is designed to help load a CD in
dark club situations. The bright LED is also used
to illuminate the CD's label.
45. REMOTE 2 INPUT CONNECTOR - This con-
nector is used to receive the control information
from the controller unit. Connect the supplied
D-Plug cables from these jacks to the similar
44
49 50 51