Creating And Playing A Loop - American Audio MCD-510 Operating Instructions Manual

BASIC OPERATIONS (CONT)
11. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to
create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length
of disc. You create a seamless loop between two continuous points of a disc.
2) Press the IN BUTTON (4). This will set the start-
ing point of the Seamless Loop (figure 17). The IN
BUTTON (4) will blink.
Figure 18
4) Press the RELOOP BUTTON (15) to reactivate
the Seamless loop. Press the OUT BUTTON (10)
to deactivate the loop.
S G L
C T N
Figure 16
S G L
C T N
SINGLE
TOTAL
REMAIN
TRACK M S F
American Audio - www.AmericanAudio.us - MCD-510™ Instruction Manual Page 17
© ®
1) Press PLAY/PAUSE BUTTON (16) to activate
playback mode.
3) Press the OUT BUTTON (10) to set the end-
ing point for your Seamless Loop (Figure 18).
The OUT and IN BUTTON's will stay lit indicat-
ing a Seamless Loop is playing. Press the OUT
BUTTON again to stop the Loop.
TRACK
Figure 19
S G L
C T N
S G L
C T N
Figure 17
S G L
C T N
S G L
C T N
SINGLE
TOTAL
REMAIN
M S F